A critical security vulnerability identified as CVE-2026-110461 affects the Comelit 1456B Multi-User Gateway, an intercom and building automation interface widely deployed across multi-tenant residential complexes and commercial properties. Security findings confirm that the gateway ships configured with static, pre-defined default passwords across multiple privileged accounts. Because the onboarding workflow does not require system administrators or installation technicians to replace these factory credentials, affected devices remain exposed to unauthorized administrative takeover if left in their default operational state.
The flaw has been assigned a Common Vulnerability Scoring System (CVSS) version 4.0 base score of 9.3, classifying it as a critical-severity defect. The vulnerability stems from insecure account management defaults that allow an unauthenticated attacker situated on the same network or having routed access to reach the administrative interfaces, authenticate with static privileges, and manipulate device operations.
Technical Assessment and Vulnerability Mechanics
At its core, CVE-2026-110461 represents a failure in baseline credential security and setup hygiene. Network-attached building automation equipment, particularly intercom routing bridges such as the Comelit 1456B, relies on administrative user tiers to manage communication routes between external entry panels, internal apartment monitors, IP cameras, and local automation controllers.
In affected systems running firmware versions up to and including 2.10.0, the firmware establishes multiple privileged system accounts protected solely by static default passwords. Crucially, the firmware does not implement an enforced first-run setup wizard or an onboarding credential rotation requirement. Unless the administrator explicitly identifies and manually alters each credential set within the device settings, the accounts persist indefinitely with the factory-assigned values.
According to the official CVSS v4.0 metrics, the vector is defined as follows:
- Attack Vector (AV:N): Network-based. An attacker does not require physical access to the device chassis or direct serial console access. Any network pathway that permits traffic to the gateway's listening administrative services is sufficient.
- Attack Complexity (AC:L): Low. Exploitation does not depend on specialized execution conditions, race states, or memory layout randomization bypasses. Knowledge of the static credentials constitutes the entire barrier to entry.
- Attack Requirements (AT:N): None. No prior authentication or deployment-specific preconditions must be satisfied.
- Privileges Required (PR:N): None. The initial attack requires no pre-existing unprivileged account on the target system.
- User Interaction (UI:N): None. The vulnerability can be exploited completely autonomously without phishing or administrator cooperation.
- Impact Metrics (VC:H / VI:H / VA:N): Exploitation results in High Vulnerability Confidentiality impact and High Vulnerability Integrity impact, while direct Availability impact at the vulnerability level is scored as None. An attacker acquiring administrative access gains unrestricted visibility into configurations and can modify device settings, redirection rules, and administrative controls.
Affected Deployments and Architecture
The Comelit 1456B Multi-User Gateway serves as a central network bridge in building automation and entry control systems. In multi-tenant environments, the gateway bridges proprietary video entry bus systems to local IP networks, facilitating video intercom calls to resident smartphones, interior panels, and security stations. Consequently, the gateway frequently resides on shared local area networks (LANs), building management system (BMS) subnets, or demilitarized zones (DMZs) connecting property management infrastructure to the internet.
The vulnerability specifically compromises deployments running firmware version 2.10.0 and all earlier releases. Because the device is routinely installed by third-party integrators, electrical contractors, or property automation specialists, devices are often commissioned rapidly and placed into service without post-installation administrative audits.
| Component | Specification Details |
|---|---|
| Affected Product | Comelit 1456B Multi-User Gateway |
| Affected Firmware | Versions up to and including 2.10.0 |
| Vulnerability Identifier | CVE-2026-110461 |
| CVSS v4.0 Score | 9.3 (Critical) |
| CVSS Vector | CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:H/VA:N |
| Vulnerability Nature | Static default passwords for multiple privileged roles |
If an attacker gains administrative control over the Comelit 1456B gateway, the high integrity impact allows unauthorized reconfiguration of intercom routing, manipulation of access logs, modification of user directories, and potential pivoting into auxiliary building automation segments reachable through the gateway's network interfaces.
Practical Defensive Response and Remediation
Because the root cause is the presence of static default passwords combined with the absence of mandatory password rotation, defensive teams, property managers, and network administrators must take immediate operational steps to mitigate exposure:
- Manual Password Rotation: Facility engineers and security personnel must immediately connect to every installed Comelit 1456B gateway across all management interfaces and manually update the passwords for all administrative and privileged roles to robust, unique passphrases. Relying on default configurations leaves the appliance vulnerable.
- Network Segmentation: Physical security and intercom systems must never be exposed directly to the public internet. Ensure that Comelit 1456B gateways are isolated onto a dedicated, restricted virtual local area network (VLAN). Ingress traffic should be limited to authorized building management consoles and necessary intercom endpoints via strict firewall access control lists (ACLs).
- Asset Inventory and Audit: Property operators should audit all installed smart building and physical access equipment to identify deployed 1456B gateways and confirm whether firmware updates beyond
2.10.0have been released by the vendor, verifying that all default accounts have been actively superseded.
Confirmed Facts and Current Unknowns
Official records from the National Vulnerability Database confirm the CVE identifier, the CVSS v4.0 vector and score, the affected product line, and the firmware threshold of versions up to and including 2.10.0. The vulnerability documentation confirms that multiple privileged roles possess static defaults and that administrative takeover is achievable over the network.
At this stage, official advisories do not document specific patched firmware version numbers beyond 2.10.0, nor do public source records list known active in-the-wild exploitation campaigns or presence in government catalogs such as the CISA Known Exploited Vulnerabilities (KEV) list. Detailed forensic indicators of compromise or specific default role username lists have not been published in the core security bulletin. Facility operators must treat all un-audited Comelit 1456B installations running version 2.10.0 or earlier as potentially exposed until manual credential rotation and network isolation are verified.



